Customising a Rem BDL stock

Gunsmithing & DIY forum for everyone. Enjoy!
Post your projects, questions and advice here.
User avatar
Gnome
.308 Winchester
Posts: 1647
Joined: Fri Jun 19, 2009 6:15 pm
Favourite Cartridge: 375 Cheytac
Location: Newcastle
Contact:

Re: Customising a Rem BDL stock

Post by Gnome »

Some stella works there Marcus. 👌👌

Did most all of that bog come off or is that the final, If so will oiling cause it to lift?
Branxhunter
.338 Lapua Magnum
Posts: 2223
Joined: Sat Dec 10, 2011 7:49 pm
Favourite Cartridge: .20-222
Location: South west Victoria

Re: Customising a Rem BDL stock

Post by Branxhunter »

The bog us still there. As much as I love an oil finish I don't think it will work with the bog. I normally wet sand to fill the pores but I suspect the bog sanding dust won't be conducive to a good outcome.

This one will be done with marine varnish which should seal over the bog and timber. This stock work was only ever to develop a pattern to get a stock cut from a nice blank at some later date. I will probably bolt the .22-250 barrelled action into it and use it for a year or two to see if there are any changes or reshaping required.

Marcus
Last edited by Branxhunter on Tue Apr 14, 2020 6:30 am, edited 1 time in total.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Customising a Rem BDL stock

Post by The Raven »

Consider that whatever standard type finish you apply it will tell a story. No need to specifically hide the work you’ve done, highlight and celebrate it. Purists be damned.


Sent from my iPhone using Tapatalk
User avatar
Ned Kelly
.270 Winchester
Posts: 1277
Joined: Tue Oct 31, 2006 6:39 am
Favourite Cartridge: 6PPC
Location: Macedon Ranges Vic

Re: Customising a Rem BDL stock

Post by Ned Kelly »

G'day All,
very similar to the stocks you see from American Custom Gunmakers Guild website (https://www.acgg.org/) as well as the Book Bill Hambly Clark Jnr wrote.
An interesting book if you can find it is Michael Petrovs book on "Custom Gnmakers of the 20th Century"
The grip is a classic used in traditional shotguns and rifles for pointing as I understand it.
Its not fashionable but entirely practical.
Good luck with the testing, it looks the goods.
Cheerio Ned
Branxhunter
.338 Lapua Magnum
Posts: 2223
Joined: Sat Dec 10, 2011 7:49 pm
Favourite Cartridge: .20-222
Location: South west Victoria

Re: Customising a Rem BDL stock

Post by Branxhunter »

Just applied the second coat of marine varnish

Image

Image

Marcus
Branxhunter
.338 Lapua Magnum
Posts: 2223
Joined: Sat Dec 10, 2011 7:49 pm
Favourite Cartridge: .20-222
Location: South west Victoria

Re: Customising a Rem BDL stock

Post by Branxhunter »

Stock is done - for the moment anyway.

Three coats of marine varnish rubbed back with 1200 wet and dry between each coat, with a hand rubbed Organoil wax polish as the final treatment. There was a bit of nice dark streaking and fiddleback lurking under that Rem BDL factory ‘bowling ball’ finish.

Just zeroing it in to prepare for some feral busting.

Image

Image

Image


Marcus
User avatar
MISSED
Moderator
Posts: 8367
Joined: Sat Dec 22, 2007 12:23 pm
Favourite Cartridge: 20 PPC
Location: YASS

Re: Customising a Rem BDL stock

Post by MISSED »

I like that
Well done
User avatar
Sako 22-250
.308 Winchester
Posts: 1620
Joined: Tue Oct 16, 2012 1:58 pm
Favourite Cartridge: 22-250
Location: Vic

Re: Customising a Rem BDL stock

Post by Sako 22-250 »

Well done


Sent from my iPhone using Tapatalk
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Customising a Rem BDL stock

Post by The Raven »

Beautiful work


Sent from my iPhone using Tapatalk
Post Reply