glen wrote:ok so you have of these then?.What was your pill of choice.
There are two of us Building a 6mm SLR and the plan is to run the A-max 105
I run 105 Berger VLD hunting for the long range stuff in mine 75 V max for the explosions
105 A max don't go as good in my barrel, having said that I have not persevered with them.
Cheers
Ol 55
Now bushings.I know i need to measure my own brass with a chosen projectile,But i have no projectiles as yet but do have some brass.And a friend is doing an order shortly with Sinclairs.What size bush would you recommend for starters i was thinking maybe 0.270?.Any help would be appreciated.
Now bushings.I know i need to measure my own brass with a chosen projectile,But i have no projectiles as yet but do have some brass.And a friend is doing an order shortly with Sinclairs.What size bush would you recommend for starters i was thinking maybe 0.270?.Any help would be appreciated.
I use a 271 for neck sizing I use a 276 for forming Lap 308 Palma cases that fits the sizing mandrel for my neck turner without having to go all the way to 271. saves .006 of stress on the neck of the case if you can follow that.
I turn the necks to .015 a side.
If you need any further info send me a PM.
Cheers
Ol 55
ITS FINISHED
Well it was finished a couple of years ago.
A lot has happened since then.Only fired around 200 rounds.Half way through the build I had lost all interest in shooting,in part to Family matters.Just had no time or motivation.
So now I’m getting back into it and having a Blast.
