Page 2 of 2
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Mon Sep 04, 2017 4:15 pm
by The Raven
Glenn wrote: ↑Mon Sep 04, 2017 3:35 pm
It dose cost a bit to set up but Mrs Raven must understand it is a long term investment!
When your reload your gun is more accurate so you use
less more ammo.
Glenn
Fixed it for you..
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Mon Sep 04, 2017 6:41 pm
by Gadge
The Raven wrote: ↑Sun Sep 03, 2017 6:56 pm
macca wrote: ↑Sun Sep 03, 2017 5:47 pm
Wouldn't be my choice of powder but start load around 42gr max 45gr.
Cheers
Oh, Hogdgon lists a max at 46.9 for IMR4895. I'm not interested in max yet but it's a good to know...
Something you need to be careful about here, is that AR2206H is identical to
H4895,
not IMR4895.
Different powders from different factories - IMR 4895 is made in General Dynamics' Valleyfield Powder facility in Canada.
And load data is not 1:1 interchangeable for the two 4895's.
BTW, Richard Lee's Modern Reloading has the same Start/Max loads for H4895 as macca gives.
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Mon Sep 04, 2017 8:59 pm
by The Raven
Gadge wrote: ↑Mon Sep 04, 2017 6:41 pm
The Raven wrote: ↑Sun Sep 03, 2017 6:56 pm
macca wrote: ↑Sun Sep 03, 2017 5:47 pm
Wouldn't be my choice of powder but start load around 42gr max 45gr.
Cheers
Oh, Hogdgon lists a max at 46.9 for IMR4895. I'm not interested in max yet but it's a good to know...
Something you need to be careful about here, is that AR2206H is identical to
H4895,
not IMR4895.
Different powders from different factories - IMR 4895 is made in General Dynamics' Valleyfield Powder facility in Canada.
And load data is not 1:1 interchangeable for the two 4895's.
BTW, Richard Lee's Modern Reloading has the same Start/Max loads for H4895 as macca gives.
Interesting. I'm sure I was looking at a chart listing both the IMR and H as being the same. Will check again.
Suffice to say I've loaded them conservatively.
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Wed Mar 07, 2018 10:56 am
by DSD
Glenn wrote:
As for reloading manuals I just use ADI'S Website.
Glenn
And then add 2+ gr?
Sent from my SM-G930F using Tapatalk
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Wed Mar 07, 2018 1:40 pm
by cooper
One powder would be nice in some ways
Sent from my iPhone using Tapatalk
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Wed Mar 07, 2018 7:33 pm
by Flash Gordon
ADI 9th édition 2016,
130gr. Hornady SP.
AR 2206H start load, 42grains,2782fps, 44,700 CUP.
Maximum load, 45grains,2922fps,51,000 CUP.
Not the highest velocity loads but still usefull.
Re: .270Win loads for 130gn Hornady SST AR2206H
Posted: Sun Apr 08, 2018 9:52 pm
by The Raven
Gadge, thanks for the advice.
I had to go interstate to get a decent powder for 270Win. At least it was a bargain!
Too bad no-one local stocks decent projectiles. Will have to order from elsewhere.
