.270Win loads for 130gn Hornady SST AR2206H

Discuss all aspects of Ammunition and Reloading here.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by The Raven »

Glenn wrote: Mon Sep 04, 2017 3:35 pm It dose cost a bit to set up but Mrs Raven must understand it is a long term investment!

When your reload your gun is more accurate so you use less more ammo.

Glenn
Fixed it for you.. :P
User avatar
Gadge
.22 WMR
Posts: 109
Joined: Mon Jun 11, 2007 1:24 pm
Favourite Cartridge: .270Win
Location: Gippsland, VIC

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by Gadge »

The Raven wrote: Sun Sep 03, 2017 6:56 pm
macca wrote: Sun Sep 03, 2017 5:47 pm Wouldn't be my choice of powder but start load around 42gr max 45gr.
Cheers
Oh, Hogdgon lists a max at 46.9 for IMR4895. I'm not interested in max yet but it's a good to know...
Something you need to be careful about here, is that AR2206H is identical to H4895, not IMR4895.

Different powders from different factories - IMR 4895 is made in General Dynamics' Valleyfield Powder facility in Canada.
And load data is not 1:1 interchangeable for the two 4895's.

BTW, Richard Lee's Modern Reloading has the same Start/Max loads for H4895 as macca gives.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by The Raven »

Gadge wrote: Mon Sep 04, 2017 6:41 pm
The Raven wrote: Sun Sep 03, 2017 6:56 pm
macca wrote: Sun Sep 03, 2017 5:47 pm Wouldn't be my choice of powder but start load around 42gr max 45gr.
Cheers
Oh, Hogdgon lists a max at 46.9 for IMR4895. I'm not interested in max yet but it's a good to know...
Something you need to be careful about here, is that AR2206H is identical to H4895, not IMR4895.

Different powders from different factories - IMR 4895 is made in General Dynamics' Valleyfield Powder facility in Canada.
And load data is not 1:1 interchangeable for the two 4895's.

BTW, Richard Lee's Modern Reloading has the same Start/Max loads for H4895 as macca gives.
Interesting. I'm sure I was looking at a chart listing both the IMR and H as being the same. Will check again.

Suffice to say I've loaded them conservatively.
User avatar
DSD
.270 Winchester
Posts: 1446
Joined: Wed Jul 17, 2013 9:06 pm
Favourite Cartridge: N/A
Location: In hiding

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by DSD »


Glenn wrote:
As for reloading manuals I just use ADI'S Website.

Glenn
And then add 2+ gr?

Sent from my SM-G930F using Tapatalk

cooper
New Member
Posts: 11
Joined: Tue Aug 01, 2017 3:10 pm
Favourite Cartridge: 204
Location: Melb vic

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by cooper »

Image

One powder would be nice in some ways


Sent from my iPhone using Tapatalk
Flash Gordon
.22 WMR
Posts: 131
Joined: Fri Dec 15, 2006 9:15 am
Location: Wagga Wagga, NSW.

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by Flash Gordon »

ADI 9th édition 2016,
130gr. Hornady SP.
AR 2206H start load, 42grains,2782fps, 44,700 CUP.
Maximum load, 45grains,2922fps,51,000 CUP.
Not the highest velocity loads but still usefull.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: .270Win loads for 130gn Hornady SST AR2206H

Post by The Raven »

Gadge, thanks for the advice.

I had to go interstate to get a decent powder for 270Win. At least it was a bargain! 8)

Too bad no-one local stocks decent projectiles. Will have to order from elsewhere.
Post Reply