Ted’s knife thread
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Ted’s knife thread
Well in case we miss any of the posts due to forum traffic levels let’s keep all Ted’s new knife builds in one spot.
Ted if you post them in this thread we will all be able to find them. Ps I know as a dedicated forged in fire fan that I would enjoy photos of hot metal or any other part of the process if you have the time to take and post them as well as the finished article.
And just to kick it off here is my deermaster collection. There should be five but stupid lost one
Sent from my iPhone using Tapatalk
Ted if you post them in this thread we will all be able to find them. Ps I know as a dedicated forged in fire fan that I would enjoy photos of hot metal or any other part of the process if you have the time to take and post them as well as the finished article.
And just to kick it off here is my deermaster collection. There should be five but stupid lost one
Sent from my iPhone using Tapatalk
- mick_762
- 50 BMG
- Posts: 4156
- Joined: Sun Mar 04, 2012 1:46 pm
- Favourite Cartridge: 308 Norma
- Location: Wodonga Vic
Re: Ted’s knife thread
Another 3 to kick it off, only 1 "commissioned" per se.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
- dashooter
- .338 Lapua Magnum
- Posts: 2805
- Joined: Tue Oct 15, 2013 4:08 pm
- Favourite Cartridge: Wby Magnum's :)
- Location: Deep South Canberra
Re: Ted’s knife thread
Three of mine.
Sent from my iPhone using Tapatalk
- Rabbitz
- .338 Lapua Magnum
- Posts: 2421
- Joined: Sun Mar 25, 2007 9:05 am
- Favourite Cartridge: 222
- Location: Barossa Valley, SA
- Contact:
Re: Ted’s knife thread
My one...
- LoneRider
- 50 BMG
- Posts: 3899
- Joined: Thu May 22, 2008 10:20 pm
- Favourite Cartridge: 308
- Location: rubyvale,Central Qld
Re: Ted’s knife thread
ill get to it soon ted,ive been a bit busy[slack]...sorry.
- Gnome
- .308 Winchester
- Posts: 1647
- Joined: Fri Jun 19, 2009 6:15 pm
- Favourite Cartridge: 375 Cheytac
- Location: Newcastle
- Contact:
Re: Ted’s knife thread
To help out KJD and Ted, I think I've found all his posts with in the General Discussion's forum.
All KJD has tad do is coppy and paste all the bellow into a new sub-forum within Equipmen titled The Cutting Edge and all other posts/threads from then on in can be made within there.
I've done my bit for you mate, now I'm having a break for dinner!!
A gift for Divey
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25990
Ringed Gidyea Boning Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25983
The PITA Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25950
My Book number one is for sale.
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25961
Mitchell Boner
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25955
Boning Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25948
Chef Knife for Ben
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25949
San Mai for a good friend
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25919
Last one for a while
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25904
Damascus for a good bloke I know
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25874
A new hawk
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25896
A good dog
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25893
Knife number 100
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25884
The stuff up knife that turned out ok in the end
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25864
A Cleaver this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25858
These are a few I still have
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25816
Isolation Knife 6
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25814
More Added a few more
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25807
Finished this one today
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25800
New Knife with Mammoth teeth scales
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25781
Mammoth rib bone scales on this one
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25761
A new Mitchell Belt Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25759
A painting of me when I was young
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25758
Shed Building
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25728
Another Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25722
Two new knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25710
chef knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25713
Deer in my Dam
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25708
My lad has got my book published
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25692
San Mai this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25663
Knife for Nick Harvey 1st for the year
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25649
The knife that cut a star picket
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25636
Green Taipan
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25635
New knife NitroV
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25624
Damascus Baby
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25623
Barbie with Barry B
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25618
San Mai Damascus and Mammoth tusk
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25511
a couple more knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25576
A few photos from the cape trip
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25572
Another one A baby knife with Mammoth tusk scales
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25518
Mammoth Tusk and stainless
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25465
A new Anvil
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25404
Trying to cut steel with my knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25427
San Mai Stainless ladder pattern
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25415
cutting brass rod with one of my knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25396
Free Skeleton Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25356
Finished Mammoth tusk knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25394
One for me this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25375
Damascus Stainless San Mai
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25364
This one for a hump man
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25348
Hey Daisy Check this out
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25345
New Sheaths
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25340
Rabbit knife for a friend
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25326
New Baby 1084 and antler
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25313
Enclosed tang knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25306
Damascus & Purple box elder burl
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25280
A baby Mitchell Belt Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25274
Skeletons in my closet
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25258
Damascus a different shape
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25028
Alien's Blood number 4 for the year
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25025
Devil's Cut Mitchell Australian Belt Knife ha ha
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25016
Happy new year to you all
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24957
Damascus Puma look alike
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24912
Christmas present for my mate
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24902
Got a rabbit this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24885
Mitchell Belt Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25090
Stainless and Mother of pearl
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24866
Bowhunting today and got lucky
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24808
Chef Knife with Giraffe bone scales
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24827
Making Chain
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24813
Ivory & Stainless another new knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24797
Stainless Knife with sambar antler
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24786
another small knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24708
Check out my new saddle
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24692
Two small knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24707
something Bimbo made for me a while ago
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24689
A fancy knife this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24674
Just about ready to take wursts out of the shed
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24643
Wursts Recipe's
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24644
Damascus for a Birthday Boy
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24630
W.A. Banksia cone knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24614
Just finished a knife for a good friend
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24605
All KJD has tad do is coppy and paste all the bellow into a new sub-forum within Equipmen titled The Cutting Edge and all other posts/threads from then on in can be made within there.
I've done my bit for you mate, now I'm having a break for dinner!!
A gift for Divey
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25990
Ringed Gidyea Boning Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25983
The PITA Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25950
My Book number one is for sale.
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25961
Mitchell Boner
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25955
Boning Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25948
Chef Knife for Ben
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25949
San Mai for a good friend
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25919
Last one for a while
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25904
Damascus for a good bloke I know
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25874
A new hawk
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25896
A good dog
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25893
Knife number 100
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25884
The stuff up knife that turned out ok in the end
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25864
A Cleaver this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25858
These are a few I still have
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25816
Isolation Knife 6
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25814
More Added a few more
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25807
Finished this one today
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25800
New Knife with Mammoth teeth scales
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25781
Mammoth rib bone scales on this one
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25761
A new Mitchell Belt Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25759
A painting of me when I was young
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25758
Shed Building
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25728
Another Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25722
Two new knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25710
chef knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25713
Deer in my Dam
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25708
My lad has got my book published
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25692
San Mai this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25663
Knife for Nick Harvey 1st for the year
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25649
The knife that cut a star picket
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25636
Green Taipan
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25635
New knife NitroV
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25624
Damascus Baby
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25623
Barbie with Barry B
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25618
San Mai Damascus and Mammoth tusk
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25511
a couple more knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25576
A few photos from the cape trip
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25572
Another one A baby knife with Mammoth tusk scales
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25518
Mammoth Tusk and stainless
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25465
A new Anvil
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25404
Trying to cut steel with my knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25427
San Mai Stainless ladder pattern
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25415
cutting brass rod with one of my knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25396
Free Skeleton Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25356
Finished Mammoth tusk knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25394
One for me this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25375
Damascus Stainless San Mai
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25364
This one for a hump man
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25348
Hey Daisy Check this out
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25345
New Sheaths
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25340
Rabbit knife for a friend
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25326
New Baby 1084 and antler
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25313
Enclosed tang knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25306
Damascus & Purple box elder burl
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25280
A baby Mitchell Belt Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25274
Skeletons in my closet
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25258
Damascus a different shape
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25028
Alien's Blood number 4 for the year
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25025
Devil's Cut Mitchell Australian Belt Knife ha ha
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25016
Happy new year to you all
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24957
Damascus Puma look alike
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24912
Christmas present for my mate
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24902
Got a rabbit this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24885
Mitchell Belt Knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=25090
Stainless and Mother of pearl
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24866
Bowhunting today and got lucky
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24808
Chef Knife with Giraffe bone scales
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24827
Making Chain
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24813
Ivory & Stainless another new knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24797
Stainless Knife with sambar antler
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24786
another small knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24708
Check out my new saddle
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24692
Two small knives
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24707
something Bimbo made for me a while ago
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24689
A fancy knife this time
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24674
Just about ready to take wursts out of the shed
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24643
Wursts Recipe's
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24644
Damascus for a Birthday Boy
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24630
W.A. Banksia cone knife
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24614
Just finished a knife for a good friend
https://ausvarmint.com/forum/viewtopic.php?f=8&t=24605
- bimbo
- 300 Win Mag
- Posts: 1791
- Joined: Tue Oct 10, 2006 10:34 pm
- Favourite Cartridge: 17HH
- Location: Newcastle, NSW
Re: Ted’s knife thread
As Trev said I would also love to see a bit more of your process. I still remember reading your grinder build project over on AHN (well I think that was you) and also reading the article in SSAA ? mag on making knives. Probably part of what made me realise that you don't need all this fancy bits of kit to make a decent knife and just get stuck in to it and make one.
-
- 7mm08 Rem
- Posts: 868
- Joined: Sun Aug 05, 2018 7:25 pm
- Favourite Cartridge: 358ME
- Location: Ipswich Qld
Re: Ted’s knife thread
Thanks Bimbo and glad you started making knives yourself mate. The scales you make are fantastic too. Can't believe how much trouble Gnome has gone to to keep me posting here, Thanks mate your a legend. and yes Trevor, I will try to find some pics of making something with the forge and showing some hot metal for you. Ta matebimbo wrote: ↑Tue Aug 18, 2020 7:59 pm As Trev said I would also love to see a bit more of your process. I still remember reading your grinder build project over on AHN (well I think that was you) and also reading the article in SSAA ? mag on making knives. Probably part of what made me realise that you don't need all this fancy bits of kit to make a decent knife and just get stuck in to it and make one.
And thanks everyone for your votes of confidence and help in getting me to keep posting here .
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Ted’s knife thread
I will be the nigger in the wood pile..............................get ya shit sorted Teddles. FFS
Should get photos of the three that Ted has made for me and mine. Maybe tomorrow.
Should get photos of the three that Ted has made for me and mine. Maybe tomorrow.
- macca
- .338 Lapua Magnum
- Posts: 2465
- Joined: Wed Feb 21, 2007 7:46 pm
- Favourite Cartridge: 308/6br
- Location: Southern Highlands NSW
Re: Ted’s knife thread
I am the proud owner of the Green Taipan from the above threads.
Cheers
Cheers
-
- 7mm08 Rem
- Posts: 868
- Joined: Sun Aug 05, 2018 7:25 pm
- Favourite Cartridge: 358ME
- Location: Ipswich Qld
Re: Ted’s knife thread
Ha ha yeah I am gunna try to get my shit sorted Mark
Glad you liked the Taipan, I reckon I have another piece of that wire Damascus here somewhere, I have mislaid it, but hopefully will make another Taipan from it one day.
-
- 7mm08 Rem
- Posts: 868
- Joined: Sun Aug 05, 2018 7:25 pm
- Favourite Cartridge: 358ME
- Location: Ipswich Qld
Re: Ted’s knife thread
MAKING A HAWK FROM A PINCH BAR
Well as you said Trev at least I think it was you. Here's a few pics of making a Hawk from an old Pinch Bar
Photo one is a piece of the bar, 2 I have drilled some holes and dremeled it a bit then heating it up and then quenching then the final Hawk.
Well as you said Trev at least I think it was you. Here's a few pics of making a Hawk from an old Pinch Bar
Photo one is a piece of the bar, 2 I have drilled some holes and dremeled it a bit then heating it up and then quenching then the final Hawk.
-
- 7mm08 Rem
- Posts: 868
- Joined: Sun Aug 05, 2018 7:25 pm
- Favourite Cartridge: 358ME
- Location: Ipswich Qld
-
- 7mm08 Rem
- Posts: 868
- Joined: Sun Aug 05, 2018 7:25 pm
- Favourite Cartridge: 358ME
- Location: Ipswich Qld
- dashooter
- .338 Lapua Magnum
- Posts: 2805
- Joined: Tue Oct 15, 2013 4:08 pm
- Favourite Cartridge: Wby Magnum's :)
- Location: Deep South Canberra
Re: Ted’s knife thread
Looks cool Ted.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk