Elevation for dove tail action

[Jmc]

Hi all looking for more elevation in my gun only have 5 moa left how can I get 20moa or so rail if it mounts on dove tail action ?

[Seddo]

Like this

http://www.egwguns.com/hd-scope-mounts/ ... nt-20-moa/

[mick_762]

I think ice engineering also do something for increased elevation on dovetail actions.

http://www.iceng.com.au/

[Tackleberry]

I think ice engineering also do something for increased elevation on dovetail actions.

http://www.iceng.com.au/

hmmm thanks mick I just might have a use for one of them

[Tackleberry]

I emailed them and at these prices t5hey won't get my money and as to why they need to drill and tap it is beyond me

Thanks for the email. We most certainly can. You will need to get the
action drilled and tapped, or you can send it to us and we can do it
as part of the job.
We can fabricate the rail with 20MOA for $185 and drill and tapping
for the LA101 would be $75 inc GST (we provide all the hardware
needed, eg screws) plus post/transfer (about $40 to get it back to
your dealer). We can throw in Cerakote or anodized finish to the
picatinny rail as past of the price too.

Regards,
Myf

[mick_762]

I emailed them and at these prices t5hey won't get my money and as to why they need to drill and tap it is beyond me

Thanks for the email. We most certainly can. You will need to get the
action drilled and tapped, or you can send it to us and we can do it
as part of the job.
We can fabricate the rail with 20MOA for $185 and drill and tapping
for the LA101 would be $75 inc GST (we provide all the hardware
needed, eg screws) plus post/transfer (about $40 to get it back to
your dealer). We can throw in Cerakote or anodized finish to the
picatinny rail as past of the price too.

Regards,
Myf

Perhaps the drill and tap is to attach the rail?
I haven't looked into or seen any of their work. . . Just "spitballing" to use a token Americanism.

[Tackleberry]

I emailed them and at these prices t5hey won't get my money and as to why they need to drill and tap it is beyond me

Thanks for the email. We most certainly can. You will need to get the
action drilled and tapped, or you can send it to us and we can do it
as part of the job.
We can fabricate the rail with 20MOA for $185 and drill and tapping
for the LA101 would be $75 inc GST (we provide all the hardware
needed, eg screws) plus post/transfer (about $40 to get it back to
your dealer). We can throw in Cerakote or anodized finish to the
picatinny rail as past of the price too.

Regards,
Myf

Perhaps the drill and tap is to attach the rail?
I haven't looked into or seen any of their work. . . Just "spitballing" to use a token Americanism.

LA101 is already taped ...... that and I can get 20moa rails ceakoted for $100

[mick_762]

Yeah ummm i got nothin

[stinkitup]

Have a egw rail on the savage not dove tailed but do like the rail and for the price was easy install. Think I ordered through Hinterland, not in stock...had it about 2 weeks later on my door step. Good service!