Think before do

Talk about your Varmint Rifles and other firearms here!
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Think before do

Post by trevort »

For a change.

Just ordered qd rings for my Atn. I think I like it now and as it remembers multiple profiles I thought I would
Like to try swapping onto the 22 from time to time.

That means I need a picatinny rail on the 22 . Then I have to work out how to mount the ir illuminator. I don’t like stuff hanging off the barrel.

So it’s a cz 452 sporter in a Boyd’s varmint stock, very well floated.

So do I buy a bit of rail and try to make a flat bit under the stock and screw it on and hang the light off it? Sort of bastardise the stock. Which is not a problem.

Or do I sell the 22 and is there another type out there that has a rail for the scope and something on the foreend to hang the light.

Just considering before spending money on the cz as it might be more cost effective to just replace it


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

trevort wrote:For a change.

Just ordered qd rings for my Atn. I think I like it now and as it remembers multiple profiles I thought I would
Like to try swapping onto the 22 from time to time.

That means I need a picatinny rail on the 22 . Then I have to work out how to mount the ir illuminator. I don’t like stuff hanging off the barrel.

So it’s a cz 452 sporter in a Boyd’s varmint stock, very well floated.

So do I buy a bit of rail and try to make a flat bit under the stock and screw it on and hang the light off it? Sort of bastardise the stock. Which is not a problem.

Or do I sell the 22 and is there another type out there that has a rail for the scope and something on the foreend to hang the light.

Just considering before spending money on the cz as it might be more cost effective to just replace it


Sent from my iPhone using Tapatalk
Keep it simple Trev. Put the torch on the scope.
You need a 30mm scope mount with a Pic rail section attached. Pretty sure I have a few spare. Can post you down one of you like?
Rob


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

What QD mounts did you end up getting?


Sent from my iPhone using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Think before do

Post by trevort »

Warne maxima ultra high

And a picatinny rail for the CZ is $95 and I've found a bit of rail that attaches to a sling swivel stud and a torch mount with elevation adjustment to go on it!

This may be easier than I thought
User avatar
mick_762
50 BMG
Posts: 4156
Joined: Sun Mar 04, 2012 1:46 pm
Favourite Cartridge: 308 Norma
Location: Wodonga Vic

Re: Think before do

Post by mick_762 »

Or...
Ruger Precision Rimfire.

Fenring / Foxfire has been making good use of one from memory.
As a chassis rifle it will also be a familiar shape and form as the one you already have.
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

trevort wrote:Warne maxima ultra high

And a picatinny rail for the CZ is $95 and I've found a bit of rail that attaches to a sling swivel stud and a torch mount with elevation adjustment to go on it!

This may be easier than I thought
Or I post you up a picatinny rail scope mount for free. Can’t post a pick for some reason on Tapatalk.


Sent from my iPhone using Tapatalk
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: Think before do

Post by fenring »

mick_762 wrote: Tue Dec 01, 2020 5:57 am Or...
Ruger Precision Rimfire.

Fenring / Foxfire has been making good use of one from memory.
As a chassis rifle it will also be a familiar shape and form as the one you already have.
I like mine, but by the time you hang a torch and bipod off it, it is a heavy, bulky bastard.

Don't the ATN scopes have a rail on them for the torch?
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

fenring wrote:
mick_762 wrote: Tue Dec 01, 2020 5:57 am Or...
Ruger Precision Rimfire.

Fenring / Foxfire has been making good use of one from memory.
As a chassis rifle it will also be a familiar shape and form as the one you already have.
I like mine, but by the time you hang a torch and bipod off it, it is a heavy, bulky bastard.

Don't the ATN scopes have a rail on them for the torch?
Only the original non-QD mounts have the rail built in.


Sent from my iPhone using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Think before do

Post by trevort »

Rob I have a qd mount on the torch so it clips on and off the rail very easily but the underside of a standard stock is sloped so it would be hard to line the light up with the aim point. This torch mount I say on eBay is adjustable. Can move the beam up and down and lock it when you get it right so you can adjust for the slope of the stock.

Mick I thought of looking at a chassis but I think I’ll keep to one chassis rifle.

The young bloke I purchase mentored came round last night to make up his first rounds. He ordered a howa barrelled action and MDT chassis. Came up very well


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

trevort wrote:Rob I have a qd mount on the torch so it clips on and off the rail very easily but the underside of a standard stock is sloped so it would be hard to line the light up with the aim point. This torch mount I say on eBay is adjustable. Can move the beam up and down and lock it when you get it right so you can adjust for the slope of the stock.

Mick I thought of looking at a chassis but I think I’ll keep to one chassis rifle.

The young bloke I purchase mentored came round last night to make up his first rounds. He ordered a howa barrelled action and MDT chassis. Came up very well


Sent from my iPhone using Tapatalk
Image
So you get one of these mounts that goes on the scope and clip the torch to it.


Sent from my iPhone using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Think before do

Post by trevort »

Yes I have some of those but hearing so many reports of finicky things these do I would prefer not to attract to the scope. And that light is quite wide. If attached to the scope or might not clear the obj


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

trevort wrote:Yes I have some of those but hearing so many reports of finicky things these do I would prefer not to attract to the scope. And that light is quite wide. If attached to the scope or might not clear the obj


Sent from my iPhone using Tapatalk
Reports about what and from where?
I’ve been using one of those scope ring rails for at least the last 12 months with no issues and my torch is the bigger badder brother of yours. If there were going to be issues I think it would have happened by now.
Regarding clearing the objective lens, there’s only one way to know...
Apart from the scope ring pic rail the rest of the torch mount is the one supplied by Sniperhogs that came with the torch.
Image

Image


Sent from my iPhone using Tapatalk
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: Think before do

Post by fenring »

I've attached rail sections to the left side of rifle fore ends. You can shim / space the front end of the rail to account for the stock taper.
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Think before do

Post by trevort »

Why is your light bigger than mine?

And just mounting it to the scope is boring. Why use equipment I already have when o can spend more money


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Think before do

Post by dashooter »

trevort wrote:Why is your light bigger than mine?

And just mounting it to the scope is boring. Why use equipment I already have when o can spend more money


Sent from my iPhone using Tapatalk
Cause you chose the model down from mine....
Save money here and spend it on betterer things Trev... Image


Sent from my iPhone using Tapatalk
Post Reply