If You had

Post by **MISSED** » Fri Dec 20, 2019 4:15 pm

This many 6x47L cases and a set of Redding Competition dies what would you do?

Sent from my iPhone using Tapatalk

macca · Post by **macca** » Fri Dec 20, 2019 4:25 pm

Well.......
The obvious answer would be make something else

So what action?
Cheers

Post by **MISSED** » Fri Dec 20, 2019 4:37 pm

Do you think maybe long dasher ?

591

macca · Post by **macca** » Fri Dec 20, 2019 5:12 pm

The long dasher would be quite interesting.
87gr v max 3400fps or so they say.
Cheers

mistit · Post by **mistit** » Fri Dec 20, 2019 6:07 pm

ive owned a long dasher missed , matt sunk a dasher reamer in basically to fireform 6x47 lap cases out to the long dasher , we did it on 2 actions , had whidden make the full length die off fire formed cases , some things work others dont , i found it picky to tune ,once i had the load it was a good thing , 60 grain bullets at 3850 with pressure though , but not worth the effort im of the opinion , varmint accurate buy not 6 dasher accurate

trevort · Post by **trevort** » Fri Dec 20, 2019 6:20 pm

Is a 6x47lap too obvious?

I made a. 22x47 Lap simply because I love my 6/250

Sent from my iPhone using Tapatalk

Ol 55 · Post by **Ol 55** » Fri Dec 20, 2019 6:49 pm

I agree with Trev on this one
22x47 lap I have a couple of blue boxes of cases just for it. One day.
Gary

Post by **MISSED** » Fri Dec 20, 2019 7:35 pm

Well it is going to be a .............drum Roll please a 6x47Lapua

A 30 inch Bartlein 1-9" tube in pretty much a straight taper is waiting to be fitted.

I put a couple of hours into stripping old finish and started the oiling process this afternoon after work.

Scope is undecided but it will be mounted in Burris Signature rings with the 20 MOA inserts.

Post by **MISSED** » Fri Dec 20, 2019 7:50 pm

Couple of foto’s

After the Citri stripping

Sent from my iPhone using Tapatalk

macca · Post by **macca** » Sat Dec 21, 2019 5:44 am

With that long a tube it will nip across those hills of yours with a bit of pace. what pills do you expect to try with the 1:9 ?
cheers

Post by **MISSED** » Sat Dec 21, 2019 9:30 am

Going to see how it balances Macca it may end up at 26".

75 grn Vmax,67 grn Copprheads for paddock work and 103-107 grainers for fun at the range.

mistit · Post by **mistit** » Sat Dec 21, 2019 1:04 pm

MISSED wrote: ↑Sat Dec 21, 2019 9:30 am Going to see how it balances Macca it may end up at 26".

75 grn Vmax,67 grn Copprheads for paddock work and 103-107 grainers for fun at the range.

the balance was my first thought to andrew i had a mate years ago with a 30 inch 308 barrel on a sako varminter and was out of balance and looked a little silly , 26 a much better option

AusVarmint

If You had

If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had

Re: If You had