p!
-
Knackers
- .338 Lapua Magnum
- Posts: 2381
- Joined: Sun Aug 06, 2006 9:22 pm
- Favourite Cartridge: .223
- Location: Riverina NSW
I'm sorry a.JR, I dont recall seeing the comp that you have spoken of and I'll give it a go since you are offering your time and effort in promoting our sport.
I have a Rem 700VSF .22.250 factory standard (except trigger job, float and bedd) is that ok to use?
Where can I find details please and does this have to be done at a range or can it be done on farm with witness's?
I have a Rem 700VSF .22.250 factory standard (except trigger job, float and bedd) is that ok to use?
Where can I find details please and does this have to be done at a range or can it be done on farm with witness's?
-
Knackers
- .338 Lapua Magnum
- Posts: 2381
- Joined: Sun Aug 06, 2006 9:22 pm
- Favourite Cartridge: .223
- Location: Riverina NSW
Unless I win Lotto I wont be going to Brisvagas anytime soon, its about 1400 kms for me.
Never been to a 500 fly before either, thats why I asked if it could be shot on farm with witness's. I can get a range officer from our local club (range only goes to 200 yards) to come out and witness and sign a target?
Anyway, thanks for offering the prize and your time, and if this thread creates enough interest, maybe everyone that does have an interest can contact you in the new year to see if it could be worth while.
Never been to a 500 fly before either, thats why I asked if it could be shot on farm with witness's. I can get a range officer from our local club (range only goes to 200 yards) to come out and witness and sign a target?
Anyway, thanks for offering the prize and your time, and if this thread creates enough interest, maybe everyone that does have an interest can contact you in the new year to see if it could be worth while.
-
trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
I didnt notice the post either, i only started reading the target sports section after rinso got me to go to leeton, now I'm hooked.
I have only done one 500 fly but with a proper comp rifle (it didnt help me
))
I will have a proper 6.5x 284 bench rifle soon so wouldnt qualify in your factory section next year but if you did it again you might have an eager amateurs section who have shot less than (say) 3? comps at 500m
I know i'm a bit of a loud mouth and post on just about anyting but you must have noticed that the interest in target shooting round here is on the up. That can only be good.
I have only done one 500 fly but with a proper comp rifle (it didnt help me
))I will have a proper 6.5x 284 bench rifle soon so wouldnt qualify in your factory section next year but if you did it again you might have an eager amateurs section who have shot less than (say) 3? comps at 500m
I know i'm a bit of a loud mouth and post on just about anyting but you must have noticed that the interest in target shooting round here is on the up. That can only be good.
-
Mullet
-
foxhunter223
- .17 HMR
- Posts: 150
- Joined: Mon Aug 21, 2006 9:59 pm
- Favourite Cartridge: 223
- Location: North Coast NSW
- Contact:
Fly shoot
a.JR, I don't recall seeing your post either and I would have a go if I lived in Brissy.
But what about what Knackers said, could we participate via a postal target match ?
Pete
But what about what Knackers said, could we participate via a postal target match ?
Pete
Mullet
I would have to disagree with your statements on why this one didn't get off the ground. I shot two fly matches while I was in the process of building my dedicated bench rifle. Along with this I shot two 600yd matches too during the same time.
Now my factory rifle was a stock standard tikka varmint in 223 with 1:12 twist which isn't really the ideal set up for a 223 to shoot the longer ranges but I used it as a learning experience. Sure the small 55gn projectiles were definitely pushed all over the place with the wind but I feel that this has given me a very good understanding of the impact of the wind, taught me to read the wind better and to wait for the condition.
All I can say is that anyone that wants to have a go then use your factory rifle and forget the rest of the guys there with their bench guns... you will not compete with them. Just like me and Trevort you will soon be investing in a dedicated bench gun and the lessons learned while shooting your factory rifle will pay off.
I would have to disagree with your statements on why this one didn't get off the ground. I shot two fly matches while I was in the process of building my dedicated bench rifle. Along with this I shot two 600yd matches too during the same time.
Now my factory rifle was a stock standard tikka varmint in 223 with 1:12 twist which isn't really the ideal set up for a 223 to shoot the longer ranges but I used it as a learning experience. Sure the small 55gn projectiles were definitely pushed all over the place with the wind but I feel that this has given me a very good understanding of the impact of the wind, taught me to read the wind better and to wait for the condition.
All I can say is that anyone that wants to have a go then use your factory rifle and forget the rest of the guys there with their bench guns... you will not compete with them. Just like me and Trevort you will soon be investing in a dedicated bench gun and the lessons learned while shooting your factory rifle will pay off.
-
Rinso
- .338 Lapua Magnum
- Posts: 2055
- Joined: Thu Jul 27, 2006 11:09 pm
- Favourite Cartridge: 25.06
- Location: Hervey Bay Qld
albow,
Could not agree with you more ... you learn everytime you shoot ..
You will not (not in my experience) just turn up to a match with a new rifle in your first comp and be in the running.
You can however learn a lot, make some friends and have a heap of fun with your factory rifle ... just remember not to take the results to heart.
cheers
Rinso
Could not agree with you more ... you learn everytime you shoot ..
You will not (not in my experience) just turn up to a match with a new rifle in your first comp and be in the running.
You can however learn a lot, make some friends and have a heap of fun with your factory rifle ... just remember not to take the results to heart.
cheers
Rinso
JR
As an addition to my last post.
Given the interest that has been shown by these guys here in this thread I think that running the factory option next year would be something worth perservering with and to make it a little more noticeable then maybe see if Keith would leave it as a sticky in the shooting sports section. That way if someone comes in throughout the year they will see the information and maybe have a go.
I looked back through the threads and I think the comp was on page 3 or 4 so no wonder it wasn't seen by too many
As an addition to my last post.
Given the interest that has been shown by these guys here in this thread I think that running the factory option next year would be something worth perservering with and to make it a little more noticeable then maybe see if Keith would leave it as a sticky in the shooting sports section. That way if someone comes in throughout the year they will see the information and maybe have a go.
I looked back through the threads and I think the comp was on page 3 or 4 so no wonder it wasn't seen by too many
-
woob614271
- 17Rem
- Posts: 1123
- Joined: Mon Jan 29, 2007 8:49 pm
- Favourite Cartridge: 17Rem, 22.250AI, 308
- Location: townsville qld